SHOTCLOCK

2 Digit, indoor/outdoor pace or shot clock.

SKU: SHOTCLOCK-HI Categories: , ,

Description

  • Case consists of an aluminum extrusion coated with a matte black anodized finish.  End caps flare at bottom to form no-tip feet.
  • Includes bracket for mounting to wall
  • Lens is transparent red, 1/8”, non-glare shatterproof Plexiglas.
  • Built in Piezo horn.
  • All models should only be connected to GFI (Ground Fault Interrupt) 110V 5 amp (min.) outlet. Battery model includes an internal, rechargeable 12V battery with an over/undercharge protection circuit.
  • When connected to the POLOWARE Interface and a PC running POLOWARE Software, the SHOTCLOCK gets its power from the Interface through the data cable and does not need to be plugged into an outlet.
  • Two character display, which displays up to 59 seconds.  Characters are 6 1/2" x 4 1/2" .
  • Each character is formed by a matrix of dots, 7 high by 5 wide.  Each dot is formed by a cluster of 4 red Super-Bright Light Emitting Diodes (LED’s), guaranteed by their manufacturer for 100,000 hours of operation.
  • When connected to the POLOWARE Interface and a PC running POLOWARE Software, the SHOTCLOCK is controlled by POLOWARE for water polo games.  When the preset time expires, a loud tone sounds.  For more information on POLOWARE, see the specification for that product.
  •  SHOTCLOCK can be controlled though the optional Programming Pendant.
  • If pendant is not attached, the SHOTCLOCK will begin counting by seconds continuously from 0:00 to 00:59, then repeat.
  • Multiple SHOTCLOCK’s can be linked together and programmed with one Programming Pendant to run synchronously.
  • Additional information

    Weight 13 lbs
    Dimensions 12.0000 x 4.0000 x 12.5000 in